So...what comes next after XXL Airlock Breast Cups have been completely filled?

brd7013

New Member
Good morning! I am still new to this site as I just ordered my first breast XXL airlock system yesterday (starting at a 38D size). Hopefully receiving the delivery next week from the UK (I'm in the US)! I'm looking to go as large as comfortably possible, but definitely anywhere above an H cup!

I've been reading in various forum threads on this site and saw that some people had the same question as me: what comes after the XXL size? I've heard different things from making new cups by hand from hard plastic cylinders and hard plastic spherical fish bowls...How would these things work?

A 2.5XL more cylindrical plastic fish bowl I found (7.25in length x 7.25in width x 8in height) https://www.amazon.com/Koller-Produ...9c806&pd_rd_wg=lD47X&pd_rd_i=B01NBV4OPV&psc=1

A 3XL spherical 1gal plastic fishbowl I found (8in length x 8in width x 7in height) https://www.amazon.com/Koller-Produ...lastic+sphere+fish+bowl&qid=1625897189&sr=8-5

A 4XL spherical 1.5gal plastic fishbowl I found (9in length x 9in width x 8in height) https://www.amazon.com/Koller-Produ...ea8d8&pd_rd_wg=tiVqM&pd_rd_i=B008CA82PK&psc=1

Would these fish bowls work for when I outgrow the XXL Airlock Cup? If so, which ones?

Thank you!
 

inuyasha5781

New Member
I would do the largest you can find to get to a h cup the plastic you can modify and add a valve to I used a bike tire valve and removed the stem
 

brd7013

New Member
I’m not exactly the best with creating things…would I look up DIY pressurized dome with bike tire valve? Please advise!
 

inuyasha5781

New Member
You drill a hole in the fish bowl smaller then the valve and pull them in you can add super glue the add to the seal and use the little tool in the valve kit to remove the valve stems
 
Top