Dharma's BUTT CUP RESEARCH And DEVELOPMENT

[Dharma]

These Pretzels are making me thirsty :

Hello Nooglers

Here is some work in progress.
I tried to post pictures on another post of Butt cups Butt they did not post. ???
So I have had to start another Thread.
Initially when testing I had trouble with Cups Farting off (I could not help it sorry pathetic attempt at humour) :
The Cups work OK BUTT I need some sort of foam around rim so it does not hurt.
These are just a work in Progress, I will Post more progress reports shortly.

Dharma

 

[Newgirlintown]

This is awesome. Why couldnt I think of that? I'm going out today to get that. What are those gold things called? I don't want to walk around aimlessly in home depot. Thanks!

 

[Dharma]

They're real and they're spectacular :

Hello Newgirlintown

I bought them from Masters Hardware in Australia.
You should be able to get them from any larger hardware chain.
I tried to find the packet for them, I don't know what they are called either.
I will try to get back there and find out the name of them.
Just ask someone in the store where the Butt Cup section is(Just Kidding) ;D
No seriously just ask where the sprinkler section is and look there.
If you can, take a piece of hose with you so you get the right size.
You want the brass fittings with threading on the other end then you put a brass nut
which I had to buy separately .
When you drill your hole in the cups just be sure to start off with a small drill bit.
You want the hole to be a tight fit and then you will have a seal with no leaks.
As I have found also you will need something to put around the edges so it does not hurt.
I think that is it, I will keep you informed of any further developments Newgirlintown.
I put some more pictures of the parts here for you. ;D

Dharma

 

[Dharma]

The sea was angry that day, my friends, like an old man trying to send back soup in a deli... :
Hello Newgirlintown

I just went to Masters Hardware and they are called 1/4 x1/8 Male tailpeices .
Dont forget to get the nuts as well.
When I bought them I bought plastic and brass ones,because I was not sure which
would be better.
But if you can get the brass ,they are better. ;D

Dharma

 

[Newgirlintown]

Thank you! I'll let you know how it goes!

 

[Dharma]

Everyone who orders their Butt Cups today gets a free set of Steak Knives,Butt wait theres more.... :

Hello Nooglers

After conducting more research at Butt Cup Inc. I have come up with this idea.
To prevent discomfort from your Butt Cups and provide a smooth rounded edge,
you have to cut out the centre of the lid see pictures.
If doing this your self, Do Be Careful. Wear safety gloves and when using hand tools always cut away from your body.
Get someone that has a jigsaw to cut out the main section of lid and trim the rest by hand.
Or if this is not possible I would suggest you forget this Idea and just put tape around the edges.
Be Careful. ;D

Dharma