My vacuum pump doesnt work

[loom]

Hello,
my vacuum pump stopped to work right.
The truth is it doesnt work at all, I can
make the fuction really difficult, it's loosing air.
I had my noogleberry order less than six months.
Please help me and tell me what to do, I am very pleasant
with my progress and I do not want to loose time.
I send also an email to sales@noogleberry with my receipt number.
Please contact me, perhaps Lucy can help me, I just dont know
what to do!
My regards and thanks for everything!!

 

[James]

Inspect your tubing very carefully, a tiny pinprick hole or crack will render it useless (cut off the offending end).

Try lubricating your pump by putting a few drops of light oil (a squirt of WD40 will do fine) into the inlet of the pump. Hold pump facing up and pump a few strokes to allow the oil to work its way through the pump. Make sure you wipe down the outside of the pump inlet with isopropyl alcohol to remove any oil so you can re-install the tubing without it slipping off.

Use a generous amount of safflower or flaxseed oil on your boobs to get a good seal and allow you boobs to slide up into the domes.

Hope this helps